Programming your Junior Genius

1. You MUST program your Junior Genius™ Remote with your DVD remote before using it. Please refer to the user manual for programming instructions (download user manual PDF).
2. For best results when programming the Junior Genius™ Remote please be sure to hold the DVD remote controller horizontally between 1-3cm away from the receiver on the Junior Genius™ Remote receiver. (see Fig. 1 for details)
3. Due to the fact that you may have any interference during the programming process and the green LED goes out, it is not necessary to program all the buttons successfully at one time. Simply press the setup button again and continue with the buttons which were not programmed successfully. The buttons can be programmed individually and you are not required to program the buttons in one time.
4. For additional support please use our Contact Support Form